Tymac Process Automation LLC

SuperShot 680K Cold Chamber Shot End: Specifications

  About Us  About Us  Products & Services  Savings & Benefits  What's New?  Articles  Case Histories  Site Map  Contact Us


Specifications:

  • Operating Pressure: 2350 psi maximum
  • Injection Force: 70.6 tons maximum
  • Cylinder Inside Diameter: 5.5 inches
  • Shot CyUnder Stroke: 18-24 inches-adjustable (optional to 30")
  • Shot Positions: 0" - 6" below centerline (optional to 9")
  • Multiplier Ratio: 2.53 : 1
  • Dry Shot Speed: >500 ips at max rated pressure
  • Mounting Method: Tie Bar Mounted
  • Includes:

    • Independent Oil Reservoir and Base
    • High Efficiency Hydraulic Circuit
    • Built-in Velocity/Position Transducer with
      • velocity/position speed: 800 counts per inch
      • velocity/position resolution: 0.00125"
    • Speed Control System
      • Tymac-manufactured SuperShot hydraulic manifold and main control valve allows the fastest closed-loop response time in the die casting industry.
    • Intensimax Ram Pressure Intensification: Adjustable intensification pressure independent of system pressure. Includes:
      • multiplier with direct acting control valve and independent close-coupled power supply
      • smooth, fast-acting cartridge manifold hydraulic check system
      • independent final pressure control
      • independent speed control of pressure buildup timing
      • high-speed electronics that trigger intensification by time, position, velocity, or any combination


    • ©2007 Tymac Process Automation LLC
      Montague, NJ 07827    (P) 973-552-4080  (F) 973-293-7778
      Email: info@tymac.com